Laser Coding Machine is a very advanced marking technology. Through the focused laser engraving technology, the characters and patterns that need to be marked are engraved on the surface of the object. Compared with traditional inkjet printing technology, laser marking has the characteristics of good quality, high consistency, strong wear resistance, high efficiency, cost saving, safety and reliability, and is widely used in the PCB industry.

With the rapid development of the IT industry, smart phones, wearable electronics and other products continue to be thinner and lighter, and consumers are increasingly demanding electronic products. Production must also be refined. In order to realize the quality control of the PCB production process, the marking of characters, one-dimensional code, two-dimensional code and other information on the PCB board is traced back, which has become the development trend of the industry.

Traditional printing technology is increasingly unable to adapt to new market technology needs due to poor wear resistance, low precision, poor aesthetics, and environmental pollution. Therefore, laser marking machine has become a trend in the PCB industry.

Marking on the surface of the PCB is like pattern drawing, company LOGO printing, contact information, QR code, etc. In the past, silk screen printing in traditional printing was usually used. In the original market demand, traditional inkjet printing technology can also meet the requirements of the market, but as the quality of electronic products continues to increase, the requirements of consumers are getting higher and higher, leading to higher and higher marking quality of PCB boards in the market. Traditional printing technology It can not adapt to new market requirements, and its shortcomings are becoming more and more obvious, such as:

1. The wear resistance is poor. The wear resistance mentioned here is not the wear resistance of the metal material. It means that the ink on the surface of the PCB is often worn away, causing blurring and discoloration.

2. Aesthetic requirements, the appearance of metal surface printing is relatively low-end, not suitable for some products with high requirements on appearance, such as medals, metal business cards, exquisite company nameplates, crafts descriptions, etc. Meet their appearance requirements.

3. In the ordinary printing process, it is necessary to use chemical solvents such as organic solvents and heavy metal elements, which have certain toxicity and cause personal injury to the silk screen printing staff. In addition, during the drying process of the screen printing ink, the volatile chemical materials gradually volatilize into the air. , causing pollution to the air and the environment.

The emergence of fiber laser marking technology has successfully solved a series of problems in traditional printing technology. It is characterized by high precision, fast speed and stable performance. Moreover, it only needs to be controlled by computer, and the operation is simple, and can print various complicated patterns, characters, two-dimensional codes and the like, which fully meets the requirements of high quality marking of the existing PCB industry.

Compared with traditional printing technology, laser marking technology has many advantages:
1. Good quality and strong wear resistance. The surface of the PCB board is clearly marked and beautiful. It can be marked with various LOGO, pattern, two-dimensional code, text and the pattern is directly engraved on the material, and the wear resistance is more prominent;
2. High processing accuracy. The laser beam emitted by the laser is focused to a minimum spot diameter of 10um (UV laser), which is of great benefit when dealing with complex graphics and precision machining;

3. High efficiency, simple operation and low cost. The user only needs to set the parameters on the computer to directly mark， and the surface mark of the material can be completed in just a few seconds to ten seconds;
4. Non-destructive marking. Laser coding machine uses non-contact processing, the laser head does not need to touch the surface of the material, so there is no need to consider damage to the material;
5. Wide range of use, safe and environmentally friendly. Various thin metal/non-metal materials can be marked;
6. Stable performance and long service life of equipment. With the development of technology, the service life of lasers has increased dramatically, and the service life of equipment has been greatly increased.

Among the laser engraving machine applications for PCB boards, the most used are UV laser marking machine and CO2 laser engraving machine. those laser coding & marking have the characteristics of small heat effect, good processing effect, high precision and fast speed, which have become the preferred technology for marking the surface of PCB board.
In the PCB industry, laser marking QR code technology can realize PCB production, process and quality traceability, and realize automation and intelligent management requirements to meet the needs of lean production, quality control and process improvement. Marking the QR code on the surface of the PCB is a common demand of current high-end customers and has been widely used.

CYCJET is the a brand name of Yuchang Industrial Company Limited. As a manufacturer, CYCJET have more than ten years experience for wholesaler and retailer of different types of handheld inkjet printing solution, Laser printing solution, portable marking solution in Shanghai China.

Keywords: Laser Coding Machine
                Laser Marking Machine
                Laser Engraving Machine
                Fly Laser Printer
               Laser Jet Printer     

Working video:
1.https://youtu.be/SGpv8NYr68E
2.https://youtu.be/9Tx3ZKMX0CI
3.https://youtu.be/DSLMWlxTMZs
4.https://youtu.be/LEYTpxU6IBk
5.https://youtu.be/CT31gX2AduM
6.https://youtu.be/0fWSryWNiX8
7.https://youtu.be/EzHfb5FCtJk

Contact Person: David Guo
Telephone: +86-21-59970419 ext 8008
MOB:+86-139 1763 1707
Email: sales@cycjet.com
Website: http://www.cycjet.com/