1. Can i program the imprint for my marking equipment on my own?

Yes, you can use the enclosed software "PCset" to program your own imprints

2. How do i replace the print cartridge on my marking equipment?

For more information on this, see the operating instructions under "replace print cartridge". The link to the operating instructions is found in the respective model designation.

3. How many prints are possible per battery charge in my marking equipment?

  CYCJET jetStamp graphic 970: approx. 1000 prints

  CYCJET  940: approx. 1000pints

  CYCJET jetStamp 790mP: 500 prints

  CYCJET speed-i-Jet 798: approx 5000 prints

4.Can my marking equipment print copies?

No, your marking device cannot print copies. It works with inkjet technology, there include:

CYCJET jetStamp 1025

CYCJET jetStamp graphic 970

CYCJET 940

CYCJET  jetStamp 790mP

CYCJET speed-i-Jet 798

5.On which materials will the quick-drying in stick?

The quick-drying ink will stick on metals and various plastics. It depends on the type of surface. Reiner recommends extensive testing before serial use.

6.What is the quick-drying ink made of?

The quick-drying inks are alcohol-based inks. Therefore, they dry faster than regular water-based inks. You can find the safety datasheets from service@cycjet.com

7. Can i print on food with the ink?

No, out ink is no food proof. Therefore, you must not print directly onto food. Also consider the respective national provisions of food law

8. How do i store the quick drying ink for my marking equipment?

Usually is a cool and dry place. For more information on this, see the operating instructions under "Storage". The link to the operating instructions is found in the respective model designation. Please click model designation.

9.Do i have a guarantee for my marking equipment?

For more information on this , see our general terms and conditions. Please click here www.cycjet.com